Video

Morning of 11-11-07. I'm havin' Fun again!!! Going wild at a local school, nobody is arround so I'm getting Crazy Practicing 3D & Flying circles arround the Basketball Courts. I do barely hit one of my wings on one of the court Poles, but just as soon as I am going to hit the ground out of control I somehow am able to recover. Today I am flying my 3-CH 3D Trainer (my Beatup Plane Right Now), the Great Planes Fun Force Zero EP, it comes as an ARF Kit, I bought mine from towerhobbies.com Link http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLLM3&P= . It comes as a very inexpensive kit (under $30). This kit assenbles extremely quick & is so simple to do repairs on. You will need to buy all of you electronics but the kit does come with a geared brushed motor. I added a Brushless Motor & 3 Cell 1350Mah Lipo Cell for performance instead of the Stock brushed Motor. I bought the Battery & Motor from epyaya.com. I Bought my Brushless Kms kbsc18 speed control fom the hobby people website. I am running a Great Planes Electrifly GP 10 x 4.5 S Prop (or also known as 254 x 114 S). Great Setup at 10 to 15 Min of flight on a pack. *I also added a length of 1/16 inch carbon fibre rod to each side of the foam body & covered this over with clear tape, This has increased the airframe structure durability BIG TIME! The Music on this Video was produced by me using the Hammerhead Rhythm Station, Thanks Hammerhead!!!! Stay tuned! more videos to come, & maybe some flight school videos also... ;) Thanks for Viewing! Have Fun & Fly Safe!!!! Product Notes: Tower Hobbies http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLLM3&P= Great Planes Fun Force Zero EP Sport/Fighter ARF 34.5" FEATURES: Construction: Carbon fiber reinforced EPS foam Wings: One-piece carbon fiber tube reinforced EPS Motor: Speed Force 370 Brushed, BB with leads Gearbox: 5to1 ratio, pre-attached to motor Prop: 10x4.5 w/ prop saver Building Time: Ready to fly in about 2 to 3 hours INCLUDES: Great Planes ElectriFly Fun Force Zero Sport/Fighter with six streamers, & hardware, instructions, 370 Brushed motor, 5:1 gearbox, 10x4.5 propeller, prop saver THIS KIT WILL REQUIRES: Radio: 4-channel Radio with mini or micro receiver Servos: 3 micro or nano - FUTM0046 (1-elevator, 1-aileron, 1-rudder) Servo Extensions: One each 6" and 12" - HCAM2000 and HCAM2100 Electronic Speed Control: 20A minimum - GPMM2025 (for stock Brushed Motor!) Battery: 1250-1500mAh 11.1V 3S Lithium Polymer - GPMP0823 ________________________ SPECS: Wingspan: 34.5" (876mm) Wing Area: 354 sq in (22.87 sq dm) Weight: 15oz (425g) Wing Loading: 6 oz/sq ft (18.31 g/sq dm) Length: 36" (914mm) Airfoil: Fully-symmetrical, mid-wing placement Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of the wing Control Throws: High Rate/3D Rate Low Rate/Sport Rate Elevator: 3-1/2" (89mm) 1-1/2" (38mm) up and down Rudder: 3-1/2" (89mm) 2" (51mm) right and left Ailerons: 3" (76mm) 1-5/8" (41mm) up and down